A huge thanks to Warren aka Blackstratblues for taking these 'Bellbird' singles and 'Integrity' humbucker through their paces.
The neck and middle pickups are from my "Bellbird" set and the bridge is an "Integrity". It's a great HSS pickup set for most styles. If you like your strat with humbucker at the bridge have a listen.
For more information and sound samples have a look here and don't forget to subscribe:
mrglynspickups.com/
mrglynspickups.com/2020/03/29/bellbird-vintage-str…
mrglynspickups.com/2020/03/29/blue-sky-vintage-hum…
Mr Glyns 'BELLBIRD'
I’ve based my Vintage Strat set on the best of the old pickups I’ve had the pleasure of playing through . So I use AWG42 heavy formvar insulated wire – there’s something about the thickness of that insulation that just works with an old Strat pickup.
I’ve aimed for that old quacking chime that makes Strats wonderfully percussive but with a singing quality that’s so musical. Warm and clear with beautiful almost reverb-like clean tones – that’s what I want out of an old Strat. The neck needs to be fat, round and clear, the middle pickup needs to quack and the bridge a cut through twang without thinness. The all important ‘in between’ sounds in positions 2 and 4 must be balanced and characterful. Nothing says Strat more than these sounds.
The Bellbird set has been designed mainly for clean tones but they’re certainly not afraid to perform with a bit of gain. As part of a HSS set they’re great with one of my ‘Integrity’ humbuckers in the bridge position.
Mr Glyns 'INTEGRITY'
Every pickup manufacturer makes a “Vintage” humbucker based on the Gibson PAF, of course they do – old Gibsons sound so good.
So how come they all sound so different? Well, the simple answer is that PAF’s were all different. I’ve been a full time luthier since 1995, whenever I come across an old humbucker I test the ohms and the gause and have a good listen. They’re all different. My conclusion is that pickup manufacturers have taken the PAF they like and based their own version on that. Old PAF’s vary so much so modern ones do as well.
I like my own version to be clear sounding, have obvious string separation and definition and to keep clarity no matter how much gain. The mids must be strong and woody, this is not a “scooped” pickup. The clean sound needs to be chimey and clear with no mush; through a valve amp I want clarity. When I tickle it I want clean and vocal sounding when it clips. The bridge pickup needs to be well behaved with high gain and clear with enough cut through so the drummer knows you’re there. The neck smooth, clear and articulate. Warm but with none of the boom you get with a more powerful pickup.
I don’t want much do I.
My “Vintage” Humbucker has an Alnico II magnet and I’ve used plain enamel insulated magnet wire with asymmetric coils to open up the mids. The very first pickup I ever made back in 1995 was a PAF style and I’ve been tweaking the recipe ever since. Like all my pickups I’ve used a number of test pilot players in its development as well as gigging it myself. It wasn’t until around 2015 that I settled on this particular design. I did a gig with a set in a PRS SE series only last weekend – sounded great to me.
The full and honest sound of this pickup along with it’s timeless tone inspired the name “Integrity”.
Mr Glyn's Pickups HSS demo 'Bellbird' singles and 'Integrity' humbucker
0:00 neck pickup
0:50 bridge pickup
2:03 neck pickup
2:35 bridge pickup
MrGlyns Pickups