Buy Now!
New Vapor Canister Vent Solenoid from 1AAuto.com trq.video/ib-1AEEV00071
This video shows you how to install a new vapor canister vent solenoid from TRQ on your 2008-2013 INFINITI G37. Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing.
Estimated installation time for a professional technician is approximately: 18 minutes
This repair was done on a 2010 INFINITI G37 X 3.7L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 INFINITI G37
2009 INFINITI G37
2010 INFINITI G37
2011 INFINITI G37
2012 INFINITI G37
2013 INFINITI G37
Tools you will need:
• 10mm Socket trq.video/ob9W-1AXAA00017
• Trim Tool Set trq.video/oaPS-1AXXX00006
• Hose Pliers
• Ratchet trq.video/ocEU-1AXAA00016
• Socket Extensions trq.video/ocEE-1AXAA00015
• Cloth Rags trq.video/o4y-1AXSS00035
• Gloves trq.video/obW5-1AXSS00048
• Safety Glasses
• Floor Jack trq.video/oaXZ-1AXAA00068
• Jack Stands trq.video/oaJB-1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
TRQ