How to Install the Delta® EverEdge Tub Wall Set (60x32)

Follow along as Mike and Hannah walk through how to install the Delta® EverEdge 60x32 Tub Wall Set. See our supply list and video shortcuts below to make installing even easier.

You'll Need:
Drill
Safety Glasses
Caulk Gun
Adhesive
-Two Tubes of Sealant
Tape Measure
Staple Gun
Sill Plate Gasket
Level
Carpenters Square
Shims
Drop Cloth
Pencil
Utility Knife
3/16” Drill Bit
Bit Holder Extension
Driver Bit
1 ¼" Stainless or Zinc Plated Truss Head Screws
Hole Saw
2 ½” Construction Screws
Lumber

Steps:
0:00 Intro
2:25 Check for Plumb, Square & Level
4:16 Install Blocking
5:48 Install Door Nailers
8:18 Dry Fit Panels
17:29 Drill Pilot Holes
17:57 Install Fire Retardant Pad
19:09 Install Foam Tape
21:06 Install Back Panel
23:55 Install Side Panels

Check out these related videos:
How to Install Shims -    • How to Install Shims  
How to Install the Delta® EverEdge Tub Base (60x32) -    • How to Install the Delta® EverEdge Tu...